The Amount Of Aluminum-plastic Cover Standard And The Explanation Of The Main Function

As a part of the packaging, the main functions of the pharmaceutical aluminum-plastic cover are as follows:
1. The sealing fully guarantees the quality of antibiotics, which is the most important function of antibiotic aluminum-plastic combination caps, and it is also the most basic requirement for manufacturers.
2. Aesthetics, which can highlight the personality of antibiotic drugs, are beautiful and generous, and play a finishing role in the packaging of the product.
3. The aluminum-plastic bottle cap of antibiotics will not deteriorate the drug, fully ensure the safety of the patient, and be responsible for the patient.

Aluminum-plastic lid standard:
1. Sterilization: take an appropriate amount of aluminum cover, and after 180 °C hot air for 1h, there should be no obvious change on the surface, and the surface layer should have no bulge or detachment.
2. Compatibility: take an appropriate amount of aluminum cap after 180 °C hot air for 1h, aluminum-plastic cap Aluminum-plastic cap, cover on the bottle containing a suitable capacity of water, and seal it with a capping device, which should be suitable for matching.
3. Coating firmness: take an appropriate amount of aluminum cover with hot air at 180 °C for 1 h, steam sterilize at 121 °C±2 °C for 30min, wipe the surface with absorbent cotton soaked in 80% (V/V) ethanol solution for 30 seconds, and then wipe the surface with absorbent cotton soaked in 70% (V/V) isopropanol solution for 30 seconds, and the coating should be free of any wear.